Mitsubishi Outlander: Combination Meter
- General Information
- Diagnostic Trouble Code Procedures
- Symptom Procedures
- Check Procedure For Each Multi Information Display Screen
- Service Reminder Function Set
READ NEXT:
General Information
CONSTRUCTION DIAGRAM
<Except color liquid crystal display>
<Color liquid crystal display>
SERVICE SPECIFICATIONS
SPECIAL TOOLS
COMBINATION METERS DIAGNOSTIC
STANDARD FLOW OF DIAGNOSTI
Diagnostic Trouble Code Procedures
DTC B1200: Malfunction of odometer
TROUBLE JUDGMENT
If the odometer information, which is stored in the
combination meter, is abnormal when the ignition
switch at the ON position and the system voltag
Symptom Procedures
Inspection Procedure 1: Power supply circuit check.
Combination Meter Power Supply Circuit
TECHNICAL DESCRIPTION (COMMENT)
If the odometer and trip meter are not displayed or all
the meter needles d
SEE MORE:
DTC P0053, P0068, P0069, P0101, P0102, P0103, P0106, P0107, P0108
DTC P0053: Linear Air-Fuel Ratio Sensor Heater Resistance
LINEAR AIR-FUEL RATIO SENSOR HEATER CIRCUIT
CIRCUIT OPERATION
Power is supplied from the MFI relay (terminal
No. 2) to the linear air-fuel ratio sensor heater.
The ECM (terminal No. 34) controls continuity to
the linear air-fuel ratio
DTC P0703, P0705, P0711, P0712, P0713, P0715, P0720, P0725, P0740,
P0741, P0745
DTC P0703: Malfunction of Stoplight Switch
Stoplight switch system circuit
DIAGNOSTIC FUNCTION
TCM detects malfunction using the stoplight switch
signal sent from the ETACS-ECU.
DESCRIPTIONS OF MONITOR METHODS
Drive the vehicle at 30 km/h (19 mph) or more for
10 seconds, and then turn the igni
© 2010-2026 Copyright cw.mioutlander.com
