Mitsubishi Outlander: Cup holder
CAUTION:
● Do not drink beverages while driving. This is distracting and could cause an accident.
For the driver’s seat
There is a built-in cup holder in the instrument panel on the driver’s side.
Pressing the centre of the lid causes the tray to pop out a little.
Pull it out completely for use.
NOTE:
● When not using the holder, push the holder to stow it away.
For the front seat
The cup holder is located in front of the floor console box.
For the second seat
1. Allow the armrest to drop down.
2. Open the lid (A) while holding the side face of the lid with your hand.
READ NEXT:
Bottle holder
CAUTION:
● Do not drink beverages while driving. This is distracting and could cause an
accident.
● Drinks could be spilled by the vibration and jolts while driving. If the spilt
dri
Cargo area cover
To use
1. Draw out the cover retracted by spring and insert it in the mounting grooves
(A).
2. Remove the cover from the mounting grooves, and the cover will be rolled back
into the retracted
Luggage hooks
There are 4 hooks located on the floor and side walls of the luggage area.
Use the hooks on the floor for securing the luggage.
CAUTION:
● Do not pile up the luggage beyond the seatback hei
SEE MORE:
Automatic Transaxle Diagnosis (A/T)
DIAGNOSTIC TROUBLESHOOTING FLOW
INTRODUCTION TO A/T DIAGNOSIS
When the A/T is failed, have an interview with the
user to gather precise information on the failure status.
After that, perform on-board test to check if the
failure is reproduced, and then start repair work. If
the repair work is sta
Digital clock
Automatic mode and manual mode is available for digital clock adjustment:
Select the automatic mode or the manual mode by performing the following operations:
1. Press the PWR switch (A) to turn ON the audio system.
2. Enter the function setup mode by pressing the TUNE switch (B) for 2 second
© 2010-2026 Copyright cw.mioutlander.com
