Mitsubishi Outlander manuals

Mitsubishi Outlander: Diagnostic Trouble Code Procedures

Mitsubishi Outlander 2007-2013 Service Manual / Brakes and Steering / Active Stability Control System (ASC) / Diagnostic Trouble Code Procedures

READ NEXT:

 DTC C100A, C1015, C1020, C102B, C1011, C101C, C1027, C1032, C1014, C101F, C102A, C1035

DTC C100A: Abnormality in FL wheel speed sensor circuit Wheel Speed Sensor Circuit CAUTION If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be set. Prior to

 DTC C1035, C1041, C1042, C1043, C1044, C1046, C1047, C1048, C1049, C104B, C104F, C1053, C1057, C105F, C1063, C1067, C105B, C1200, C1204, C1208, C120C

DTC C1035 Mutual monitoring of RR wheel speed sensor CAUTION If there is any problem in the CAN bus lines, an incorrect DTC may be set. Prior to this diagnosis, diagnose the CAN bus lines (Refer t

 DTC C2104, C1073, C2116, C121D, C121E, C1000

DTC C2104: Faulty valve power supply circuit Solenoid Valve and Motor Power Supply Circuit CAUTION If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be set. P

SEE MORE:

 Operation under adverse driving conditions

On a flooded road ● Avoid flooded roads. Water could enter the brake discs, resulting in temporarily ineffective brakes. In such cases, lightly depress the brake pedal to see if the brakes operate properly. If they do not, lightly depress the pedal several times while driving in order t

 Electronically controlled 4WD system

The electronically controlled 4WD system is an 4-wheel drive system that allows one of three drive modes to be selected with a switch, in accordance with the driving conditions. The following drive modes are available. 4-wheel drive operation requires special driving skills. Carefully read

© 2010-2026 Copyright cw.mioutlander.com