Mitsubishi Outlander: For cold and snow weather
Ventilation slots
The ventilation slots in front of the windscreen should be brushed clear after
heavy snowfall so that the operation of the heating and ventilation systems will
not be impaired.
Weatherstripping
To prevent freezing of the weatherstripping on the doors, bonnet, etc., they
should be treated with silicone grease.
Additional equipment
It is a good idea to carry a shovel or a short-handled spade in the vehicle during
the winter so that you can clear away snow if you get stranded. A small hand-brush
for sweeping snow off the vehicle and a plastic scraper for the windscreen and rear
window are also useful.
READ NEXT:
The fusible links will melt to prevent a fire if a large current attempts to
flow through certain electrical systems.
In case of a melted fuse link, we recommend you to have your vehicle inspected.
Fuse block location
To prevent damage to the electrical system due to shortcircuiting or overloading,
each individual circuit is provided with a fuse.
There are fuse blocks in the passenger compar
Before replacing a bulb, ensure the lamp is off. Do not touch the glass part
of the new bulb with your bare fingers; the skin oil left on the glass will evaporate
when the bulb gets hot and the va
SEE MORE:
DTC B1C33: Driver's Lap Pre-tensioner (Squib) System (Shorted to Squib
Circuit Ground)
Driver's Lap pre-tensioner (Squib) Circuit
CAUTION
If DTC B1C33 is set in the SRS-ECU, always diagnose
the CAN main bus line.
CIRCUIT OPERATION
The SRS-ECU judges how severe a collision is by
detecting signals
REMOVAL AND INSTALLATION
Pre-removal operation
Brake Fluid Draining
Post-installation operation
Brake Fluid Refilling and Air Bleeding
Brake Disk Runout Inspection/Correction
Removal steps
Brake hose (brake caliper side)
connection
Gasket
Brake caliper assembly
Front brake disk
Clip
© 2010-2026 Copyright cw.mioutlander.com
