Mitsubishi Outlander: Heater, Air Conditioning and Ventilation
Mitsubishi Outlander 2007-2013 Service Manual / Chassis Electrical, Heater, Air Conditioning / Heater, Air Conditioning and Ventilation
- General Information, Specifications
- Manual A/C Diagnosis
- On-vehicle Service
- Heater Unit, Heater Core, Blower Assembly and Evaporator Unit
- Compressor Assembly
READ NEXT:
General Information, Specifications
General Information
The blower, heater, and evaporator have been integrated
with the heater and A/C system to achieve
greater fan power and noise reduction.
SAFETY PRECAUTIONS
WARNING
Wear safety gog
Manual A/C Diagnosis
INTRODUCTION TO HEATER, AIR CONDITIONING AND VENTILATION DIAGNOSIS
Air is drawn into the heater assembly from either the
outside, or from the inside of the passenger cabin if
DEFROST, maximum cooling
DTC B1000, B1003, B1018, B1021, B1031, B1032, B1034, B1035, B1079,
B2214, B223B
DTC B1000: Control Panel Communication Error
DTC SET CONDITION
DTC B1000 will be set when the communication
between A/C-ECU and A/C control panel cannot be
performed.
TECHNICAL DESCRIPTION (COMMENT)
SEE MORE:
Door Assembly, Door Glass and Regulator, Door Handle and Latch
Door Assembly
REMOVAL AND INSTALLATION
Post-installation operation
Door adjustment
<Front door>
Damper removal
Damper
Door assembly and front door
hinge removal steps
Front scuff plate, cowl side trim
Wiring harness connector
connection
Door check connecting bolt
Door assembly
Running-in recommendations
During the running-in period for the first 1,000 km (600 miles), it is advisable
to drive your new vehicle using the following precautions as a guideline to aid
long life as well as future economy and performance.
● Do not race the engine at high speeds.
● Avoid rapid starting, a
© 2010-2026 Copyright cw.mioutlander.com
