Mitsubishi Outlander: Indicator lamps

Turn-signal indicator lamps/Hazard warning indicator lamps

These indicator lamps blink on and off when a turn-signal lamp is operating.

NOTE:

● If the blinking is too fast, the cause may be a blown lamp bulb or a faulty turn-signal connection.

When the hazard warning lamp switch is pressed, all turn-signal lamps will flash on and off continuously.

High-beam indicator lamp

This indicator lamp illuminates when the high beam is used.

Front fog lamp indicator lamp

This lamp illuminates while the front fog lamps are on.

Rear fog lamp indicator lamp

This lamp illuminates while the rear fog lamps are on.

Position lamp indicator lamp

This lamp illuminates with the lamp switch at or position.

Diesel preheat indicator lamp

This indicator lamp illuminates when the ignition switch is placed in the “ON” position. As the glow plug becomes hot, the lamp goes out and the engine can be started.

NOTE:

● If the engine is cold, the diesel preheat indicator lamp is on for a longer time.

● When the engine has not been started within about 5 seconds after the diesel preheat indicator lamp went out, return the ignition switch to the “LOCK” position. Then, turn the switch to the “ON” position to preheat the engine again.

● When the engine is warm, the diesel preheat indicator lamp does not come on even if the ignition switch is placed in the “ON” position.

READ NEXT: