Mitsubishi Outlander: Inside tailgate release
Mitsubishi Outlander 2007-2013 Owner's Manual / Locking and unlocking / Inside tailgate release
The inside tailgate release is designed to provide a way to open the tailgate in the case of a discharged battery.
The tailgate release lever (see illustration) is mounted on the tailgate.
You and your family should familiarise yourselves with the location and operation of the tailgate release lever.
To open
1. Open the lid (A) inside of the tailgate.
2. Move the lever (B) up to open the tailgate.
3. Push out on the upper gate to open it.
4. Slowly lower the lower gate.
CAUTION:
● Always keep the release lever lid on tailgate closed when driving so that your cargo cannot accidentally bump the lever and open the tailgate.
READ NEXT:
Electric window control
The electric windows can only be operated with the ignition switch in the “ON”
position.
WARNING:
● Before operating the electric window control, make sure that nothing is capable
of b
Sunroof
Sunroof
The sunroof can only be operated with the ignition switch in the “ON” position.
1- Open.
2- Tilt up.
3- Close, Tilt down.
To open, press the switch (1)
To stop the moving sunroof,
SEE MORE:
SRS Air Bag Diagnosis
INTRODUCTION TO DIAGNOSIS
The SRS system is controlled by the SRS-ECU. The
SRS-ECU judges how severe a collision is by detecting
signals from the left and right front impact sensors
and side impact sensors, front air bag analog
G-sensor and front air bag safing G-sensor and
side-airbag safing G-sens
Transaxle Control
REMOVAL AND INSTALLATION
WARNING
When removing and installing the transaxle
control cable and shift lock cable unit, be
careful not to hit the SRS-ECU.
Pre-removal operation
Front floor console assembly removal
Post-installation operation
Front floor console assembly installation
Key interloc
© 2010-2026 Copyright cw.mioutlander.com
