Mitsubishi Outlander: Power steering fluid

To check the fluid level
Check the fluid level in the reservoir while the engine is idling.
Check to make certain that the power steering fluid level is always between the
“MAX” and “MIN” level markings on the fluid reservoir and refill the fluid, if necessary.
Recommended fluid
Use “ATF DEXRON III or DEXRON II”.
READ NEXT:
The condition of the battery is very important for quick starting and to keep
the vehicle’s electrical system working properly.
Regular inspection and care are especially important in cold weathe
WARNING:
● Driving with tyres that are worn or improperly inflated can result in a collision
and serious or fatal injury.
Tyre inflation pressures
: Above 160 km/h (100 mph).
Check the t
Break-in the parking brake linings whenever the brake performance of the parking
brake is insufficient or whenever the parking brake linings and/or discs are replaced,
in order to assure the best
SEE MORE:
DISASSEMBLY AND ASSEMBLY
Side cover
D-ring
2-6 brake piston
D-ring
Spring retainer
Snap ring
Seal ring
Required special tools:
MB992196: Spring compressor
DISASSEMBLY
1. Remove the seal rings from the side cover.
CAUTION
Ensure that the special tool MB992196 is correctly set,
directly
REMOVAL AND INSTALLATION
Removal steps
Timing chain tensioner
Tensioner lever
Timing chain guide
Timing chain
Exhaust V.V.T. sprocket bolt
Exhaust V.V.T. sprocket assembly
Intake V.V.T. sprocket bolt
Intake V.V.T. sprocket assembly
REMOVAL SERVICE POINTS
TIMING CHAIN TENSIONER REMOVAL
1.
© 2010-2026 Copyright cw.mioutlander.com
