Mitsubishi Outlander: Power steering system
Mitsubishi Outlander 2007-2013 Owner's Manual / Starting and driving / Power steering system
When the engine is stopped, the power steering system will not function and it will require greater manual effort to operate the steering wheel. Keep this in mind in particular when towing the vehicle. Never turn off the engine while driving.
Periodically check the power steering fluid level.
CAUTION:
● Do not hold the steering wheel in the fully turned position (either left or right), for longer than 10 seconds.
This can cause damage to the power steering system.
READ NEXT:
Active stability control (ASC)
The active stability control (ASC) takes overall control of the anti-lock brake
system, traction control function and stability control function to help maintain
the vehicle’s control and tracti
Cruise control
Cruise control is an automatic speed control system that lets you keep the same
driving speed. It can be activated at 40 km/h (25 mph) or more.
CAUTION:
● When you do not wish to drive at a
Reversing sensor system
This system operates when you are backing the vehicle. It uses corner and back
sensors to detect an obstacle and sounds a buzzer to inform you of the approximate
distance to the obstacle.
CAUTION
SEE MORE:
Engine coolant
To check the coolant level
A transparent coolant reserve tank (A) is located in the engine compartment.
The coolant level in this tank should be kept between the “LOW” and “FULL” marks
when measured while the engine is cold.
To add coolant
The cooling system is a closed system and no
General Information
CENTRAL DOOR LOCKING SYSTEM
The central door locking system operates the door
lock actuator to lock or unlock the doors and liftgate
using the door lock switch built into the front power
window (main or sub RH) switch. The system has the
following operations and features:
All doors and liftgate ca
© 2010-2026 Copyright cw.mioutlander.com
