Mitsubishi Outlander: Power steering fluid
Mitsubishi Outlander 2007-2013 Owner's Manual / Maintenance / Power steering fluid
To check the fluid level
Check the fluid level in the reservoir while the engine is idling.
Check to make certain that the power steering fluid level is always between the “MAX” and “MIN” level markings on the fluid reservoir and refill the fluid, if necessary.
Recommended fluid
Use “ATF DEXRON III or DEXRON II”.
READ NEXT:
Battery
The condition of the battery is very important for quick starting and to keep
the vehicle’s electrical system working properly.
Regular inspection and care are especially important in cold weathe
Tyres
WARNING:
● Driving with tyres that are worn or improperly inflated can result in a collision
and serious or fatal injury.
Tyre inflation pressures
: Above 160 km/h (100 mph).
Check the t
Parking brake break-in
Break-in the parking brake linings whenever the brake performance of the parking
brake is insufficient or whenever the parking brake linings and/or discs are replaced,
in order to assure the best
SEE MORE:
DTC B1731, B1761, B1A08, B1A09, B1A0A, B1A0B, B1A0C, B1A0D, B1A0E, B1A0F,
B1A10, B1A11, B1A12, B1A13, B1A14, B1A15, B1A16, B1A17, B1A24, B1A25, B1A28,
B1A35, B2101, B2102
DTC B1731: Engine control module communication timeout
CAUTION
When the DTC B1731 is set, be sure to diagnose
the CAN bus line.
When replacing the ECU, always check that
the communication circuit is normal.
DTC SET CONDITION
WCM checks that the engine control module data
has been received via
Emission Control MFI
GENERAL INFORMATION
The emission control system consists of the following
subsystems:
Positive crankcase ventilation system
Evaporative emission system
Exhaust emission control system
SERVICE SPECIFICATIONS
DIAGNOSIS
SPECIAL TOOLS
VACUUM HOSES
VACUUM HOSE ROUTING
<2.4L Engine>
<3
© 2010-2026 Copyright cw.mioutlander.com
