Mitsubishi Outlander: Power steering system
When the engine is stopped, the power steering system will not function and it
will require greater manual effort to operate the steering wheel. Keep this in mind
in particular when towing the vehicle. Never turn off the engine while driving.
Periodically check the power steering fluid level.
CAUTION:
● Do not hold the steering wheel in the fully turned position (either left or
right), for longer than 10 seconds.
This can cause damage to the power steering system.
READ NEXT:
The active stability control (ASC) takes overall control of the anti-lock brake
system, traction control function and stability control function to help maintain
the vehicle’s control and tracti
Cruise control is an automatic speed control system that lets you keep the same
driving speed. It can be activated at 40 km/h (25 mph) or more.
CAUTION:
● When you do not wish to drive at a
This system operates when you are backing the vehicle. It uses corner and back
sensors to detect an obstacle and sounds a buzzer to inform you of the approximate
distance to the obstacle.
CAUTION
SEE MORE:
DTC C1035 Mutual monitoring of RR wheel speed sensor
CAUTION
If there is any problem in the CAN bus lines, an incorrect
DTC may be set. Prior to this diagnosis, diagnose
the CAN bus lines (Refer to GROUP 54C − CAN Bus
Line Diagnostic Flow).
Whenever ECU is replaced, ensure that the CAN b
REMOVAL AND INSTALLATION
WARNING
When removing and installing the transaxle
control cable and shift lock cable unit, be
careful not to hit the SRS-ECU.
Pre-removal operation
Front floor console assembly removal
Post-installation operation
Front floor console assembly installation
Key interloc
© 2010-2026 Copyright cw.mioutlander.com
