Mitsubishi Outlander: Rear window demister switch
The rear window demister switch can be operated when the engine is running.
Push the switch to turn on the rear window demister. It will be turned off automatically in about 20 minutes. To turn off the demister within about 20 minutes, push the switch again.
The indicator lamp (A) will illuminate while the demister is on.
NOTE:
● When the rear window demister switch is pressed, the outside rearview mirrors are defogged or defrosted. Refer to “Heated mirror”.
● When the rear window demister switch is pushed, the window glass becomes warm and the wipers become operable. Refer to “Wiper deicer switch”.
● The demister switch is not to melt snow but to clear mist.
Remove snow before use of the demister switch.
● When cleaning the inside of the rear window, use a soft cloth and wipe lightly along the heater wires, being careful not to damage the wires.
● Do not allow objects to touch the inside of the rear window glass, damaged or broken wires may result.
READ NEXT:
Horn switch
Press the steering wheel on or around the
mark
Economical driving
For economical driving, there are some technical requirements that have to be
met. The prerequisite for low fuel consumption is a properly adjusted engine. In
order to achieve longer life of the v
SEE MORE:
Differential
DISASSEMBLY AND ASSEMBLY
Disassembly steps
Differential side bearing
Differential side bearing
Differential sub-assembly
Adjusting shim
Required special tools:
MB990810: Side bearing puller
MB991452: Oil seal installer
MD998812: Installer cap
MD998813: Installer-100
MD998823: Installer
Cargo loads
Cargo loads precautions
CAUTION:
● Do not load cargo or luggage higher than the top of the seatback. Be sure that
your cargo or luggage cannot move once your vehicle is moving. Having the rear view
blocked, and your cargo being thrown inside the cabin if you suddenly have to brake
can
