Mitsubishi Outlander: Vehicle labeling
1-Vehicle identification number
The vehicle identification number is stamped on the bulkhead as shown in the illustration.
2-Vehicle information code plate
The vehicle information code plate is riveted as shown in the illustration.
The plate shows model code, engine model, transmission model and body colour code, etc.
Please use this number when ordering replacement parts.
1- Model code.
2- Engine model code.
3- Transmission model code.
4- Body colour code.
5- Interior code.
6- Option code.
7- Exterior code.
Vehicle identification number plate (RHD vehicles only)
This is stamped on the number plate riveted to the left front corner of the instrument panel pad. It is visible from outside of the vehicle through the windscreen.
Engine number
: Front of the vehicle.
The engine number is stamped on the engine cylinder block as shown in the illustration.
READ NEXT:
Vehicle weight
In case of trailer towing
NOTE:
● Trailer specifications indicate the manufacturer’s recommendation.
SEE MORE:
Side Impact Sensor
REMOVAL AND INSTALLATION
WARNING
Never attempt to disassemble or repair the side impact sensor. If
faulty, replace it.
Do not drop or subject the side impact sensor to impact or
vibration. Replace the side
impact sensor, if dents, cracking, deformation, or rust are present.
Replace the side
On-vehicle Service
ID CODES REGISTRATION PROCEDURE
REGISTRATION USING SCAN TOOL MB991958
(M.U.T.-III SUB ASSEMBLY)
Required Special Tools:
MB991958 Scan Tool (M.U.T.-III Sub Assembly)
MB991824: Vehicle Communication Interface (V.C.I.)
MB991827 M.U.T.-III USB Cable
MB991910 M.U.T.-III Main Harness A
The ID
