Mitsubishi Outlander: Diagnostic Trouble Code Procedures
Mitsubishi Outlander 2007-2013 Service Manual / Engine / Multiport Fuel Injection (MFI) - 2.4L Engine / Diagnostic Trouble Code Procedures
- DTC P0010, P0011, P0013, P0014, P0016, P0017, P0031, P0032, P0037, P0038
- DTC P0053, P0068, P0069, P0101, P0102, P0103, P0106, P0107, P0108
- DTC P0111, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0125, P0128, P0130, P0131
READ NEXT:
DTC P0010, P0011, P0013, P0014, P0016, P0017, P0031, P0032, P0037, P0038
DTC P0010: Intake Engine Oil Control Valve Circuit
CIRCUIT OPERATION
The intake engine oil control valve power is supplied
from the MFI relay (terminal No. 2).
The ECM controls ground intake en
DTC P0053, P0068, P0069, P0101, P0102, P0103, P0106, P0107, P0108
DTC P0053: Linear Air-Fuel Ratio Sensor Heater Resistance
LINEAR AIR-FUEL RATIO SENSOR HEATER CIRCUIT
CIRCUIT OPERATION
Power is supplied from the MFI relay (terminal
No. 2) to the linear air-fu
DTC P0111, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0125, P0128,
P0130, P0131
DTC P0111: Intake Air Temperature Circuit Range/Performance Problem
INTAKE AIR TEMPERATURE SENSOR CIRCUIT
CIRCUIT OPERATION
Approximately 5 volts are applied to the intake air
temperature sensor
SEE MORE:
Digital clock
Automatic mode and manual mode is available for digital clock adjustment:
Select the automatic mode or the manual mode by performing the following operations:
1. Press the PWR switch (A) to turn ON the audio system.
2. Enter the function setup mode by pressing the TUNE switch (B) for 2 second
Outside Mirror
GENERAL INFORMATION
DOOR MIRROR OPERATION
Remote Controlled Mirror Operation
The mirror on the door mirror moves up/down
and left/right by operating the remote controlled
door mirror switch when the ignition switch is at
the "ON" or "ACC" position.
Heated Door Mirror Operation
The rear wind
© 2010-2026 Copyright cw.mioutlander.com
