Mitsubishi Outlander: Engine
READ NEXT:
General Information
The 4B12 (2.4 L) engine is an in-line four-cylinder
engine. The cylinder numbers are assigned as
1-2-3-4 from the front of the engine (timing belt side).
The firing order is 1-3-4
DRIVE BELT TENSION CHECK
1. Remove the radiator condenser tank mounting bolt, and
move the radiator condenser tank to a place where it does
not interfere with the drive belt tension check.
CAUTION
Ch
REMOVAL AND INSTALLATION
Pre-removal operation
Engine Room Under Cover Front B and Engine Room
Side Cover (RH) Removal.
Post-installation operation
Drive Belt Tension Check.
Engine Room Under C
SEE MORE:
REMOVAL AND INSTALLATION
WARNING
Never attempt to disassemble or repair the curtain air bag
modules. If faulty, replace it.
Do not drop the curtain air bag modules or allow contact with
water, grease or oil. Replace
it if a dent, crack, deformation or rust is detected.
Do not expose the cur
Front fog lamp switch
The front fog lamps can be operated while the headlamps and tail lamps are on.
Turn the knob in the “ON” direction to turn on the front fog lamps. An indicator
lamp in the instrument cluster will also come on. Turn the knob in the “OFF” direction
to turn off th
© 2010-2026 Copyright cw.mioutlander.com
