Mitsubishi Outlander: Engine and Emission Control
Mitsubishi Outlander 2007-2013 Service Manual / Engine / Engine and Emission Control
READ NEXT:
Engine Control
GENERAL INFORMATION
For the accelerator system, the electronic throttle
valve control system, disposing of the accelerator
cable, is adopted.
This system determines the amount of pressure
applied to
General Information
By using the cruise control system, the driver can
drive at preferred speeds in a range of approximately
40 to 160 km/h (25 to 100 mph) without depressing
the accelerator pedal.
For this cruise contr
SEE MORE:
DTC U1415, U0019, U0141, U0151, U0154, U0155, U0168, U0184, U0195
DTC U1415:Coding Not Completed
CAUTION
If DTC U1415 is set in the A/C-ECU, diagnose the
CAN main bus line.
CAUTION
Whenever the ECU is replaced, ensure that the
communication circuit is normal.
TROUBLE JUDGMENT
The A/C-ECU receives the vehicle information signals
from the ETACS-ECU via the CAN bus
Power Steering Diagnosis
INTRODUCTION TO POWER STEERING DIAGNOSIS
Hydraulic power steering is used for all vehicles.
Faults in the power steering can include excessive
play of the steering wheel, difficult steering wheel
operation, noise, vibration, and oil leaks, etc. Possible
causes of these faults can include defects in
© 2010-2026 Copyright cw.mioutlander.com
