Mitsubishi Outlander: Engine Electrical
Mitsubishi Outlander 2007-2013 Service Manual / Engine / Engine Electrical
READ NEXT:
Charging System
GENERAL INFORMATION
The charging system charges the battery with the
generator output to keep the battery charged at a
constant level during varying electrical load.
OPERATION
Rotation of the excited
Starting System
GENERAL INFORMATION
If the ignition switch is turned to the "START" position,
current flows in the coil provided inside magnetic
switch, attracting the plunger. When the plunger
is attracted, the lev
Ignition System
GENERAL INFORMATION
This system is equipped with four <2.4L> or six
<3.0L> ignition coils with built-in power transistors for
each of the cylinders.
Interruption of the primary current fl
SEE MORE:
DTC C1915, C1925, C1935, C1945, U0019, U0141, U0151, U0154, U0155, U0164, U0184,
U0195, U0245, U1412 , U1415, U1417
DTC C1915: Transmitter OFF mode 1
DTC C1925: Transmitter OFF mode 2
DTC C1935: Transmitter OFF mode 3
DTC C1945: Transmitter OFF mode 4
CAUTION
If there is any problem in the CAN bus lines, an incorrect
diagnostic trouble code may be set. Prior to this diagnosis,
diagnose the CAN bus lines.
DTC SET
Engine oil
To check and refill engine oil
The engine oil used has a significant effect on the engine’s performance, service
life and startability. Be sure to use oil of the recommended quality and appropriate
viscosity.
All engines consume a certain amount of oil during normal operation. Therefore,
© 2010-2026 Copyright cw.mioutlander.com
