Mitsubishi Outlander: General
- How To Use This Manual
- How To Use Troubleshooting, Inspection Service Points
- Vehicle Identification, General Data and Specifications
- Precautions Before Service
- Tightening Torque, Lubrication and Maintenance
- Maintenance Service
- Harness Connector Inspection (Electrical)
- How To Diagnose (Electrical)
READ NEXT:
How To Use This Manual
MAINTENANCE, REPAIR AND
SERVICING EXPLANATIONS
This manual provides explanations, etc. concerning
procedures for the inspection, maintenance, repair
and servicing of the subject model. Unless otherwis
How To Use Troubleshooting, Inspection Service Points
TROUBLESHOOTING CONTENTS
DANGER
The SRS-ECU adopts the rollover specification
that the curtain airbag and seat belt
pre-tensioner operate at the occurrence of
rollover. Therefore, do not tilt the vehi
Vehicle Identification, General Data and Specifications
Vehicle Identification
VEHICLE IDENTIFICATION NUMBER PLATE
VEHICLES IDENTIFICATION NUMBER LOCATION
The vehicle identification number (VIN) plate is located on a
plate attached to the left top side of
SEE MORE:
On-vehicle Service
DOOR FIT ADJUSTMENT
Required Special Tools:
MB990211: Slide Hammer
MB990243: Body Puller
MB990900 or MB991164: Door Adjusting Wrench
MB990939: Brass Bar
CAUTION
Do not rotate special tool MB991164 with a torque of
over 98 N*m (72 ft-lb).
1. When the clearance between the door and the body
Modification/alterations to the electrical orfuel systems
MITSUBISHI MOTORS CORPORATION has always manufactured safe, high quality vehicles.
In order to maintain this safety and quality, it is important that any accessory
that is to be fitted, or any modifications carried out which involve the electrical
or fuel systems, should be carried out in acco
© 2010-2026 Copyright cw.mioutlander.com
