Mitsubishi Outlander: Inside rear-view mirror
Adjust the rear-view mirror only after making any seat adjustments so you have
a clear view to the rear of the vehicle.
WARNING:
● Do not attempt to adjust the rear-view mirror while driving. This can be dangerous.
Always adjust the mirror before driving.
Adjust the rear-view mirror to maximize the view through the rear window.
To adjust the vertical mirror position

It is possible to move the mirror up and down to adjust its position.
To reduce the glare

1- Normal.
2- Anti-glare.
The lever (A) at the bottom of the mirror can be used to adjust the mirror to
reduce the glare from the headlamps of vehicles behind you during night driving.
READ NEXT:
To adjust the mirror position
The outside rear-view mirrors can be operated when the ignition switch is in
the “ON” or “ACC” position.
WARNING:
● Do not attempt to adjust the rear-v
[For vehicles equipped with the keyless operation system]
For information on operations for vehicles equipped with the keyless operation
system, refer to “Keyless operation system:
Ignition swit
[For vehicles equipped with the keyless operation system].
For information on operations for vehicles equipped with the keyless operation
system, refer to “Keyless operation system:
Steering whe
SEE MORE:
An air filter has been incorporated into this air conditioning so that pollen
and dust are cleaned from the air.
Replace the air filter periodically as its ability to clean the air will be reduced
as it collects pollen and dirt. For the maintenance interval, refer to the “SERVICE
BOOKLET”
DTC B1200: Malfunction of odometer
TROUBLE JUDGMENT
If the odometer information, which is stored in the
combination meter, is abnormal when the ignition
switch at the ON position and the system voltage is
10 −16 volts (data from ETACS-ECU), DTC B1200 is
stored.
TROUBLESHOOTING HINTS
The combin
© 2010-2026 Copyright cw.mioutlander.com
