Mitsubishi Outlander: Parking brake break-in
Break-in the parking brake linings whenever the brake performance of the parking
brake is insufficient or whenever the parking brake linings and/or discs are replaced,
in order to assure the best brake perfomance.
This procedure is described in the vehicle service manual and can be carried
out by a MITSUBISHI MOTORS Authorised Service Point.
READ NEXT:
Windscreen wiper blades
1. Lift the wiper arm off the windscreen.
2. Pull the wiper blade until its stopper (A) disengages from the hook (B). Pull
the wiper blade further to remove it.
NOTE:
&
Fuel, engine coolant, oil and exhaust gas leakage
Look under the body of your vehicle to check for fuel, engine coolant, oil and
exhaust gas leaks.
WARNING:
● If you see a suspicious fuel l
Ventilation slots
The ventilation slots in front of the windscreen should be brushed clear after
heavy snowfall so that the operation of the heating and ventilation systems will
not be impaired.
SEE MORE:
Automatic mode and manual mode is available for digital clock adjustment:
Select the automatic mode or the manual mode by performing the following operations:
1. Press the PWR switch (A) to turn ON the audio system.
2. Enter the function setup mode by pressing the TUNE switch (B) for 2 second
When a person is sitting in the second seat, raise the head restraints to height
at which it lock in position. Refer to “Head restraints”.
NOTE:
● It is possible to adjust each side of the second seats forward and backward
independently of the other side, and to adjust the seatback a
© 2010-2026 Copyright cw.mioutlander.com
