Mitsubishi Outlander: Service precautions
Adequate care of your vehicle at regular intervals serves to preserve the value and appearance as long as possible.
Maintenance items as described in this owner’s manual can be performed by the owner.
We recommend you to have the periodic inspection and maintenance performed by a MITSUBISHI MOTORS Authorised Service Point or another specialist.
In the event a malfunction or a problem is discovered, we recommend you to have it checked and repaired. This section contains information on inspection maintenance procedures that you can do yourself. Follow the instructions and cautions for each of the various procedures.
WARNING:
● When checking or servicing the inside of the engine compartment, make sure the engine is switched off and has had a chance to cool down.
● If it is necessary to do work in the engine compartment with the engine running, be especially careful that your clothing, hair, etc., does not become caught by the fan, drive belts, or other moving parts.
● The fan can turn on automatically even if the engine is not running. Turn the ignition switch to the “LOCK” position to be safe while you work in the engine compartment.
● Do not smoke, cause sparks or allow open flames around fuel or battery. The fumes are flammable.
● Be extremely cautious when working around the battery. It contains poisonous and corrosive sulphuric acid.
● Do not get under your vehicle with just the body jack supporting it. Always use automotive jack stands.
● Improper handling of components and materials used in the vehicle can endanger your personal safety. We recommend you to consult a specialist for necessary information.
READ NEXT:
Bonnet
To open
1. Pull the release lever toward you to unlock the bonnet.
2. Raise the bonnet while pressing the safety lock.
NOTE:
● Only open the bonnet when the wipers are in the parked posi
Engine oil
To check and refill engine oil
The engine oil used has a significant effect on the engine’s performance, service
life and startability. Be sure to use oil of the recommended quality and appropr
Engine coolant
To check the coolant level
A transparent coolant reserve tank (A) is located in the engine compartment.
The coolant level in this tank should be kept between the “LOW” and “FULL” marks
w
SEE MORE:
DTC U0020, U0021, U0022, U0023, U0024, U0025, U0026, U0141, U0151, U0155, U0164,
U0168, U0184, U0195, U0245, U1419, U141A, U141B, U141C, U1423
DTC U0020: CAN-B Bus Off Performance
DTC U0021: CAN-B Bus(H1) Circuit Open
DTC U0022: CAN-B Bus(H1) Shorted to Circuit Ground
DTC U0023: CAN-B Bus(H1) Shorted to Circuit Power Supply
DTC U0024: CAN-B Bus(L0) Circuit Open
DTC U0025: CAN-B Bus(L0) Shorted to Circuit Ground
DTC U0026: CAN-B Bus(L0) Sho
Side Impact Sensor
REMOVAL AND INSTALLATION
WARNING
Never attempt to disassemble or repair the side impact sensor. If
faulty, replace it.
Do not drop or subject the side impact sensor to impact or
vibration. Replace the side
impact sensor, if dents, cracking, deformation, or rust are present.
Replace the side
