Mitsubishi Outlander: Tools and jack
Storage
The tools and jack are stowed on the right side of the luggage area.
The storage location of the tools and jack should be remembered in case of an
emergency.

1- Jack.
2- Tools.
Tools

1- Tool case.
2- Wheel nut wrench.
3- Jack bar.
4- Towing hook.
Jack
To remove

1. Turn the knob (A) anticlockwise and remove the lid (B).

2. Remove the fastening band (C) and remove the tools.

3. Retract the jack and remove it from its installation fitting (D).
To store
1. Retract the jack, then return it to its original position.
2. Extend the jack and firmly secure it.

3. Return the tools to the tool bag, return it to its original position, and
firmly fasten with the fastening band.
4. Install the lid and turn the knob clockwise.
READ NEXT:
Before changing a tyre, first stop your vehicle in a safe, flat location.
1. Park the vehicle on level and stable ground, free of loose pebbles, etc..
2. Set the parking brake firmly.
3. Turn the i
If your vehicle needs to be towed
If you need to tow your vehicle, we recommend that you contact a MITSUBISHI MOTORS
Authorised Service Point or tow truck company.
In the following cases, transp
On a flooded road
● Avoid flooded roads. Water could enter the brake discs, resulting in temporarily
ineffective brakes. In such cases, lightly depress the brake pedal to see if the
brakes
SEE MORE:
MITSUBISHI MOTORS CORPORATION has always manufactured safe, high quality vehicles.
In order to maintain this safety and quality, it is important that any accessory
that is to be fitted, or any modifications carried out which involve the electrical
or fuel systems, should be carried out in acco
F6AJA and W6AJA models have been established. For the AWD system mounted to
some vehicles,
based on the electronic control AWD which distributes
the driving force to the rear wheels, the driving
force control between front right and left wheels has
been improved additionally, and S-AWC (Super All
W
© 2010-2026 Copyright cw.mioutlander.com
