Mitsubishi Outlander: For emergencies
Mitsubishi Outlander 2007-2013 Owner's Manual / For emergencies
- If the vehicle breaks down
- Emergency starting
- Engine overheating
- Tools and jack
- How to change a tyre
- Towing
- Operation under adverse driving conditions
READ NEXT:
If the vehicle breaks down
If the vehicle breaks down on the road, move it to the shoulder and use the hazard
warning flashers.
Refer to “Hazard warning flasher switch”.
If the engine stops/fails
Vehicle operation and
Emergency starting
If the engine cannot be started because the battery is weak or dead, the battery
from another vehicle can be used with jumper cables to start the engine.
WARNING:
● To start the engine using
Engine overheating
When the engine has overheated, the information screen in the multi-information
display will be interrupted and the engine coolant temperature warning display will
appear. The screen will then cha
SEE MORE:
Hazard warning flasher switch
Use the hazard warning flasher switch when the vehicle has to be parked on the
road for any emergency.
The hazard warning flashers can always be operated, regardless of the position
of the ignition switch.
Push the switch to turn on the hazard warning flashers, all turn signal lamps
flash
Diagnostic Item 14-23
DIAGNOSTIC ITEM 14: Diagnose the lines between joint connector (CAN2)
and joint connector
(CAN3).
CAUTION
When servicing a CAN bus line, ground yourself by touching a metal object such
as an unpainted
water pipe. If you fail to do so, a component connected to the CAN bus line may
be damaged.
CAN
© 2010-2026 Copyright cw.mioutlander.com
