Mitsubishi Outlander: Turn-signal lever
1- Turn-signals.
When making a normal turn, use position (1). The lever will return automatically when cornering is completed.
2- Lane-change signals.
When moving the lever to (2) slightly to change a lane, the side turn-signal lamps and indicator lamp in the instrument cluster will only flash while the lever is operated.
Also, when you move the lever to (2) slightly then release it, the side turn-signal lamps and indicator lamp in the instrument cluster will flash three times.
NOTE:
● If the lamp flashes unusually quickly, the bulb in a turnsignal lamp may have burned out. We recommend you to have the vehicle inspected.
● It is possible to activate the following functions. For further information, we recommend you to consult a MITSUBISHI MOTORS Authorised Service Point.
On vehicles equipped with Mitsubishi Multi-Communication System (MMCS), screen operations can be used to make the adjustment. Refer to the separate owner’s manual for details.
• Flashing of the turn-signal lamps when the lever is operated with the ignition switch in the “ACC” position
• Deactivate the turn-signal lamp 3-flash function for lane changes
● You can adjust the time required to operate the lever for the 3-flash function.
For further information, we recommend you to consult a MITSUBISHI MOTORS Authorised Service Point.
READ NEXT:
Hazard warning flasher switch
Use the hazard warning flasher switch when the vehicle has to be parked on the
road for any emergency.
The hazard warning flashers can always be operated, regardless of the position
of the igni
Fog lamp switch
Front fog lamp switch
The front fog lamps can be operated while the headlamps and tail lamps are on.
Turn the knob in the “ON” direction to turn on the front fog lamps. An indicator
lamp in
Wiper and washer switch
Windscreen wipers
The windscreen wipers can be operated with the ignition switch in the “ON” or
“ACC” position.
If the blades are frozen to the windscreen or rear window, do not operate th
SEE MORE:
How to change a tyre
Before changing a tyre, first stop your vehicle in a safe, flat location.
1. Park the vehicle on level and stable ground, free of loose pebbles, etc..
2. Set the parking brake firmly.
3. Turn the ignition key to the “LOCK” position, move the gearshift lever to
the “R” (Reverse) position
Outside Mirror
GENERAL INFORMATION
DOOR MIRROR OPERATION
Remote Controlled Mirror Operation
The mirror on the door mirror moves up/down
and left/right by operating the remote controlled
door mirror switch when the ignition switch is at
the "ON" or "ACC" position.
Heated Door Mirror Operation
The rear wind
