Mitsubishi Outlander: Engine and Emission Control
Mitsubishi Outlander 2007-2013 Service Manual / Engine / Engine and Emission Control
READ NEXT:
Engine Control
GENERAL INFORMATION
For the accelerator system, the electronic throttle
valve control system, disposing of the accelerator
cable, is adopted.
This system determines the amount of pressure
applied to
General Information
By using the cruise control system, the driver can
drive at preferred speeds in a range of approximately
40 to 160 km/h (25 to 100 mph) without depressing
the accelerator pedal.
For this cruise contr
SEE MORE:
DTC P0010, P0011, P0013, P0014, P0016, P0017, P0031, P0032, P0037, P0038
DTC P0010: Intake Engine Oil Control Valve Circuit
CIRCUIT OPERATION
The intake engine oil control valve power is supplied
from the MFI relay (terminal No. 2).
The ECM controls ground intake engine oil control
valve by turning the power transistor in the
ECM "ON" and "OFF".
TECHNICAL DESCR
Accessory socket
CAUTION:
● Be sure to use a “plug-in” type accessory operating at 12 V and at 120 W or
less.
When using more than one socket at the same time, make sure that the electrical
accessories are 12 V accessories and that the total power consumption does not exceed
120 W.
● Long us
© 2010-2026 Copyright cw.mioutlander.com
