Mitsubishi Outlander: If the vehicle breaks down
Mitsubishi Outlander 2007-2013 Owner's Manual / For emergencies / If the vehicle breaks down
If the vehicle breaks down on the road, move it to the shoulder and use the hazard warning flashers.
Refer to “Hazard warning flasher switch”.
If the engine stops/fails
Vehicle operation and control are affected if the engine stops.
Before moving the vehicle to a safe area be aware of the following:
● The brake booster becomes inoperative and the pedal effort will increase. Press down the brake pedal harder than usual.
● Since the power steering pump is no longer operative, the steering wheel feels heavy when turning it. Turn the wheel with more effort than usual.
READ NEXT:
Emergency starting
If the engine cannot be started because the battery is weak or dead, the battery
from another vehicle can be used with jumper cables to start the engine.
WARNING:
● To start the engine using
Engine overheating
When the engine has overheated, the information screen in the multi-information
display will be interrupted and the engine coolant temperature warning display will
appear. The screen will then cha
Tools and jack
Storage
The tools and jack are stowed on the right side of the luggage area.
The storage location of the tools and jack should be remembered in case of an
emergency.
1- Jack.
2- Tools.
Tools
SEE MORE:
Wheel Speed Sensor
REMOVAL AND INSTALLATION
CAUTION
The vehicle speed detection encoder collects any
metallic particle easily, because it is magnetized.
Make sure that the encoder should not collect
any metallic particle. Check that there is not any
trouble prior to reassembling it.
Pre-removal and post-installation
Transaxle Control
REMOVAL AND INSTALLATION
WARNING
When removing and installing the transaxle
control cable and shift lock cable unit, be
careful not to hit the SRS-ECU.
Pre-removal operation
Front floor console assembly removal
Post-installation operation
Front floor console assembly installation
Key interloc
© 2010-2026 Copyright cw.mioutlander.com
