Mitsubishi Outlander: If the vehicle breaks down
Mitsubishi Outlander 2007-2013 Owner's Manual / For emergencies / If the vehicle breaks down
If the vehicle breaks down on the road, move it to the shoulder and use the hazard warning flashers.
Refer to “Hazard warning flasher switch”.
If the engine stops/fails
Vehicle operation and control are affected if the engine stops.
Before moving the vehicle to a safe area be aware of the following:
● The brake booster becomes inoperative and the pedal effort will increase. Press down the brake pedal harder than usual.
● Since the power steering pump is no longer operative, the steering wheel feels heavy when turning it. Turn the wheel with more effort than usual.
READ NEXT:
Emergency starting
If the engine cannot be started because the battery is weak or dead, the battery
from another vehicle can be used with jumper cables to start the engine.
WARNING:
● To start the engine using
Engine overheating
When the engine has overheated, the information screen in the multi-information
display will be interrupted and the engine coolant temperature warning display will
appear. The screen will then cha
Tools and jack
Storage
The tools and jack are stowed on the right side of the luggage area.
The storage location of the tools and jack should be remembered in case of an
emergency.
1- Jack.
2- Tools.
Tools
SEE MORE:
Parking
To park the vehicle, fully engage the parking brake, and then move the gearshift
lever to 1st or “R” (Reverse) position.
Parking on a hill
To prevent the vehicle from rolling, follow these procedures:
Parking on a downhill
Turn the front wheels toward the kerb and move the vehicle forward
Ignition switch
[For vehicles equipped with the keyless operation system]
For information on operations for vehicles equipped with the keyless operation
system, refer to “Keyless operation system:
Ignition switch”.
[Except for vehicles equipped with the keyless operation system]
LOCK
The engine is stop
© 2010-2026 Copyright cw.mioutlander.com
